FUTURA MAX
Plastic industrial LED light fitting intended for extreme temperatures -40°C to +70°C, with diffuser made of translucent polycarbonate.
| Code | Type | Ta Max.: [°C] |
Luminous flux of LED modules [lm] |
Luminous flux of light fitting: [lm] |
Power consumption: [W] |
System efficacy: [lm/W] |
Net weight: [kg] |
A [mm] |
D [mm] |
|---|---|---|---|---|---|---|---|---|---|
| 79820 | FUTURA 1.5ft MAX PCc Al 4000/840 | 70 | 3850 | 3620 | 23,3 | 155 | 3,6 | 1452 | 940 |
| 79830 | FUTURA 1.5ft MAX PCc Al 5500/840 | 65 | 5340 | 5020 | 31,9 | 157 | 3,6 | 1452 | 940 |
| 79840 | FUTURA 2.4ft MAX PCc Al 6400/840 | 65 | 6240 | 5870 | 36,3 | 162 | 3 | 1172 | 700 |
| 79800 | FUTURA 2.4ft MAX PCc Al 8800/840 | 60 | 8690 | 8170 | 49,7 | 164 | 3 | 1172 | 700 |
| 79850 | FUTURA 2.5ft MAX PCc Al 8000/840 | 65 | 7770 | 7300 | 44,4 | 164 | 3,9 | 1452 | 940 |
| 79810 | FUTURA 2.5ft MAX PCc Al 11000/840 | 60 | 12310 | 11570 | 71,1 | 163 | 3,9 | 1452 | 940 |
Features
- Standard model - CRI > 80: 4000 K
- Possibility of using in even higher ambient temperatures under the condition of a shortened service life of the light fitting – parameters solved within a particular project
- Package contains stainless hooks and stainless brackets
Technical data
- System efficacy: 164 lm/W
- Degree of protection: IP66
- Minimum ambient temperature: ta = -40 °C
- Maximum ambient temperature: ta = 70 °C
- Life time: 50000 hours / L80/B10
- Unified Glare Ratio (UGR) from 19,9 to 23,9
- Impact strength: IK10
- Chromaticity tolerance (initial MacAdam): SDCM3
- Certification CE, HACCP
Attachment method
- Suitable for suspended mounting
- Suitable for ceiling mounting
- Suitable for wall mounting
- Suitable for surface mounting
Materials / finishes
- Body: Grey PC (high mechanical resistance, UV stability, RAL 7035)
- Diffuser: Translucent PC (high mechanical resistance, UV stability)
- Reflector: steel sheet, white (RAL 9003)
- Clips: Stainless steel + polyamide
- Sealing: polyurethane (PUR), foam-filled base groove
- Connection: Screwless three-pole terminal block, Screwless three-pole terminal block, 3-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), Screwless five-pole terminal block, 5-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), screwless five-pole terminal block, screwless seven-pole terminal block, 7-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand)
- Cable glands: PG 13.5 thread
Electric equipment
- It can be delivered in dimmable version
Download
Click the relevant product code in the table above to access the EULUMDAT (.ldt) files and the installation instructions for your luminaire.
BIM
Download the BIM objects.
More about BIM at bim.lighting.
Accessories to FUTURA MAX
Drawings and graphs of luminosity
Nothing you say?
Check out instructions in which we explain what can be read from these graphs.
Plastic industrial LED light fitting intended for extreme temperatures -40°C to +70°C, with diffuser made of translucent polycarbonate.
The light fitting is suitable for indoor and outdoor with roof with extreme ambient temperatures from (-40 °C to +70 °C). The fixture is designed especially for refrigeration, cold stores, bakeries, heating plants, metallurgical lines, glass factories and other premises without the danger of explosion of gases, dusts and flammable vapors.
The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact.
(It is necessary to consider exhalation in the air which can reduce the usability of the plastic and aluminium at installations in an aggressive environment).