SIMPLIA

Features

• Trevos Design and Development
• The MultiLumen (ML) function allows for easy switching between up to four light output levels using a DIP switch on the driver.
• Quick and easy installation with variable mounting spacing
• Flicker-free
• UV-stable
• Option for through-wiring (up to 5 wires inside the luminaire)
• Stainless steel hooks and stainless steel clips are included

Technical data

• System efficacy: 136 lm/W
• Degree of protection: IP65
• Minimum ambient temperature: ta = -25 °C
• Maximum ambient temperature: ta = 40 °C
• Minimum ambient temperature: ta = 0 °C version with emergency back-up source
• Maximum ambient temperature: ta = 40 °C version with emergency back-up source
• Life time: 100000 hours / L80 @25°C
• Unified Glare Ratio (UGR) from 23,8 to 24,3
• Impact strength: IK10
• Chromaticity tolerance (initial MacAdam): SDCM4
• Certification CE

Attachment method

• Suitable for suspended mounting
• Suitable for ceiling mounting
• Suitable for wall mounting
• Suitable for surface mounting

Materials / finishes

• Body: Grey PC (high mechanical resistance, UV stability, RAL 7035)
• Diffuser: Translucent PC (high mechanical resistance, UV stability)
• Reflector: Steel sheet, white (RAL 9003)
• Clips: Stainless steel locks
• Sealing: Silicone sealing
• Connection: Screwless three-pole terminal block, Screwless three-pole terminal block, 3-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), Screwless five-pole terminal block, 5-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), Screwless five-pole terminal block
• Cable glands: M20x1.5 thread

Electric equipment

• It can be delivered in emergency version
• It can be delivered in dimmable version

Download

Data sheet

CE

Click the relevant product code in the table above to access the EULUMDAT (.ldt) files and the installation instructions for your luminaire.

BIM

Download the BIM objects.
More about BIM at bim.lighting.

• Plugin
• Library

• Plugin
• Library

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual

Luminosity curve

The catalogue sheet of each light fitting or the electronic catalogue in our website offer the luminosity curves. The luminosity curve shows graphically how the light fitting radiates light into the space. In other words, in what direction it emits light. The light source is situated in the centre of the system - in the polar area in the graph. When the light fitting is rotationally symmetric around its vertical axis (circle, square), we construct only one intensity distribution curve in one vertical plane. Red in our case. When the light fitting is not symmetric, we add a blue curve to the graph. The blue curve shows how the light fitting shines after rotation by 90° as against the first position. When measuring the light fitting in the axis of the source, we measure the C90-C270 plane; when measuring the light fitting vertically to the axis, we measure the C0-C180 plane. See the picture below.

• The luminosity in the given direction is measured by the goniophotometer.
• TREVOS disposes of that device.
• We are able to measure all light fittings by ourselves and to record the luminous output.
• So we can be sure that the light fitting shines as it should.

Luminosity curve example

The SIMPLIA luminaire combines minimalist design, high efficiency and reliable performance in demanding environments.
Thanks to its clean lines and homogeneous light distribution, it ensures high-quality, uniform illumination of both working and technical areas.

The variable light output enabled by the MultiLumen function allows the lighting intensity to be adjusted to current requirements, with a strong emphasis on an optimal price-to-performance ratio.
Its robust construction made of highly durable polycarbonate, complemented by stainless steel diffuser locks, guarantees a long service life even in challenging industrial conditions.

SIMPLIA is designed for quick and easy installation with flexible mounting options, saving both time and installation costs.
Thanks to its maintenance-free operation and long lifetime, it minimizes operating expenses and provides efficient and reliable lighting for car parks, garages, workshops, production lines and warehouse facilities.