PRIMA VP ABS

Technical data

• System efficacy: 157 lm/W
• Degree of protection: IP66/IP69
• Minimum ambient temperature: ta = -25 °C
• Maximum ambient temperature: ta = 50 °C
• Minimum ambient temperature: ta = 0 °C version with emergency back-up source
• Maximum ambient temperature: ta = 40 °C version with emergency back-up source
• Life time: 50000 hours / L90/B10
• Unified Glare Ratio (UGR) from 22,9 to 26,3
• Impact strength: IK10
• Chromaticity tolerance (initial MacAdam): SDCM3
• Certification CE, ENEC, CB, HACCP, EPD

Attachment method

• Suitable for suspended mounting
• Suitable for ceiling mounting
• Suitable for wall mounting
• Suitable for surface mounting

Materials / finishes

• Body: Dark grey ABS (high chemical resistance, UV stability, RAL 7001)
• Diffuser: Translucent ABS (high chemical resistance, UV stability)
• Reflector: Steel sheet, white (RAL 9003)
• Clips: Polyamide + 15 % fibreglass, Stainless steel + polyamide
• Sealing: Polyurethane (PUR), foam-filled base groove
• Connection: Screwless three-pole terminal block, Screwless five-pole terminal block, 5-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), Screwless five-pole terminal block, Screwless seven-pole terminal block, 7-wire connecting cabling for feed-through installation (1.5 mm2 cross-section, 2.5 mm2 available on demand), Screwless seven-pole terminal block
• Cable glands: PG 13.5 thread

Electric equipment

• It can be delivered in emergency version
• It can be delivered in dimmable version

Download

Data sheet

CE

ENEC

CB

HACCP

EPD

Click the relevant product code in the table above to access the EULUMDAT (.ldt) files and the installation instructions for your luminaire.

BIM

Download the BIM objects.
More about BIM at bim.lighting.

• Plugin
• Library

• Plugin
• Library

Accessories to PRIMA VP ABS

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual

Luminosity curve

The catalogue sheet of each light fitting or the electronic catalogue in our website offer the luminosity curves. The luminosity curve shows graphically how the light fitting radiates light into the space. In other words, in what direction it emits light. The light source is situated in the centre of the system - in the polar area in the graph. When the light fitting is rotationally symmetric around its vertical axis (circle, square), we construct only one intensity distribution curve in one vertical plane. Red in our case. When the light fitting is not symmetric, we add a blue curve to the graph. The blue curve shows how the light fitting shines after rotation by 90° as against the first position. When measuring the light fitting in the axis of the source, we measure the C90-C270 plane; when measuring the light fitting vertically to the axis, we measure the C0-C180 plane. See the picture below.

• The luminosity in the given direction is measured by the goniophotometer.
• TREVOS disposes of that device.
• We are able to measure all light fittings by ourselves and to record the luminous output.
• So we can be sure that the light fitting shines as it should.

Luminosity curve example

It is intended to be installed in sheltered outdoor spaces. It features a ventilation membrane that equalizes pressures while blocking water and contaminants that build up inside of the fitting as a result of temperature fluctuations.

The fitting is highly recommended for agricultural buildings and other spaces with chemically aggressive environments due to ammonia fumes, lye fumes, alkali, hot water (hydrolysis) and oils. The product is primarily intended for agricultural buildings and industrial halls such as farms, stables, production plants and warehouses, and spaces with permanently high humidity (such as car washes and tunnels). Additionally, it is a perfect choice for the tropical zone and coastal areas. IP69-rated and HACCPcompliant, the fitting’s design also makes it a great choice for the food industry.

The fitting´s base is made of ABS and diffuser of AC, resulting in their exceptional chemical resistance. Emissions in the environment of use may reduce the usability of the plastics.