PERUN SLIM Ex NM

Technical data

• System efficacy: lm/W
• Degree of protection: IP66
• Minimum ambient temperature: ta = 0 °C
• Maximum ambient temperature: ta = 35 °C
• Life time: 50000 hours / L80/B20
• Impact strength: IK10

Materials / finishes

• Body: steel sheet, impact resistant, chemically resistant
• Diffuser: satin, heat-strengthened safety glass
• Reflector: steel sheet, white (RAL 9003)
• Clips: stainless steel
• Sealing: silicone, on the base of the light
• Connection: screwless five-pole terminal block
• Cable glands: PG 13.5 thread, brass with surface finish

Download

Data sheet

Click the relevant product code in the table above to access the EULUMDAT (.ldt) files and the installation instructions for your luminaire.

BIM

Download the BIM objects.
More about BIM at bim.lighting.

• Plugin
• Library

• Plugin
• Library

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual

Luminosity curve

The catalogue sheet of each light fitting or the electronic catalogue in our website offer the luminosity curves. The luminosity curve shows graphically how the light fitting radiates light into the space. In other words, in what direction it emits light. The light source is situated in the centre of the system - in the polar area in the graph. When the light fitting is rotationally symmetric around its vertical axis (circle, square), we construct only one intensity distribution curve in one vertical plane. Red in our case. When the light fitting is not symmetric, we add a blue curve to the graph. The blue curve shows how the light fitting shines after rotation by 90° as against the first position. When measuring the light fitting in the axis of the source, we measure the C90-C270 plane; when measuring the light fitting vertically to the axis, we measure the C0-C180 plane. See the picture below.

• The luminosity in the given direction is measured by the goniophotometer.
• TREVOS disposes of that device.
• We are able to measure all light fittings by ourselves and to record the luminous output.
• So we can be sure that the light fitting shines as it should.

Luminosity curve example

Non-maintained emergency luminaire for escape routes is intended by its function and shape primarily for being in a set with PERUN SLIM Ex light fittings.

The light fitting is suitable for the environment with a danger of explosion of gas, dust and combustible fumes. The light fittings meet the requirements of European Community Directive No.2014/34/EU.

The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to EN 60079-15, EN 60079-0 and EN 60079-31.

The light fitting is resistant to deformation, dust, spouting water and have increased chemical resistance.

Characteristics of the used tempered glass and its shattering power are controlled by the EN 12150-1 standard. For applications where spontaneous fracture means a higher safety risk.