Homepage Catalogue BELTR LED BELTR LED

BELTR LED

(Ingress Protection: IP40) Code for protection level against dust, solid items and water.
LED light fitting.
Light fitting with 5-year warranty. It does not cover light fittings fitted with emergency module (2 years) and batteries (6 months).
The colour rendering index determines the colour sensation accuracy at other than daily lighting.
The chromaticity temperature determines the colour spectrum of the light (it is given in Kelvin - 4000 K).
During the stated operation life and under observance of the specified operating conditions, less than 10% (B10) chips won´t experience defaults and the total luminous flux of the light fitting will not drop under 90% (L90).
Nominal maximum temperature of environment 35 °C.
Nominal minimum temperature of environment -25 °C.
Electric equipment: with digital dimmable driver DALI.
Electric equipment: for three-wire connection into screwless terminal block 2,5 mm2.
Fire and ignition resistance at test by hot loop heated to 650 °C. AC - cover made of acrylate.
Light fitting suitable for direct installation on commonly flammable surfaces. At present, the light fittings are without mark, according to the new ČSN EN 60598-1 standard.
Use of heat-resistant supply cables, through-wiring cables or external inputs (105°).
Nominal input voltage 220-240V, 0/50/60 Hz
Direct current (DC) and alternating current (AC) input voltage
Class 1 light fitting - basic insulation, plus terminal for guard wire.
3 phase through-wiring connection.
Electric equipment: for emergency illumination with own independent source.
Conformity mark documenting conformity verification of product with all EU harmonising provisions.
Internationally acknowledged certificate. Product certification according to IEC standards.
The mark is registered at the CENELEC as a Czech mark expressing the permanent conformity of a product with electrical safety standards.
ENEC 21 - Licence mark indicating product conformity with European standards for electric safety of product.
ENEC 05 - Licence mark indicating product conformity with European standards for electric safety of product.
Light fittings meet photobiological safety requirements in accordance with the CSN EN 62471:2009 standard. Suitable for use in areas with persons sensitive to UV radiation & the blue visible spectrum (daylight).

Batten plastic indoor LED light fitting for surface mounting on the ceiling or on the wall, with base made of metal sheet and with diffuser made of translucent polycarbonate.

The light fitting is suitable for offices, hallways, school interiors, libraries, lecture rooms, sanitary rooms, hospitals and passenger terminals.

Thanks to its high luminous efficiency and low electricity consumption it is a suitable replacement for light fittings with fluorescent tubes.

Suitability for use

Offices and households
Offices and households
Shopping centres
Shopping centres
Sports grounds
Sports grounds
Infrastructures
Infrastructures
Staircases and corridors
Staircases and corridors
Culture and education
Culture and education
Health care
Health care

Description

Advantages

  • Light fitting protection: IP40
  • Maximum ambient temperature: ta = 35 °C, Maximum ambient temperature: ta = 25 °C (version with emergency back-up source for 1 or 3 hours; M1h)
  • Lifetime: 50,000 hours / L90B10
  • Standard model - CRI > 80: 4000 K
  • The watt and lumen values can, in accordance with valid standards, vary by ± 7,5 %
  • Certification: ESČ, ENEC, CB

Materials / finishes

  • Diffuser: translucent polycarbonate (PC), UV stable, impact-resistant
  • Body: steel sheet, white colour (RAL 9003)
  • Cable gland: white, rubber
  • Terminal block: screwless, three-pole (basic version)
  • Side covers: white (ABS), UV stable, with offsets allowing fixing the light fitting with enclosed screws M4 against tampering

Electric equipment

  • Electric equipment: LED modules, current driver or current driver DALI

Attachment method

  • Directly to a ceiling or a wall with the use of screws

Download

Data sheet
Installation manual
Ldt data
Chemical resistance

Accessories to BELTR LED

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual
PRODUCT VARIANTS AND TECHNICAL DATA Clicking the 5-digit code displays other product information.
Code Type Luminous flux of LED modules
[lm ]		 Luminous flux of light fitting
[lm ]		 Power consumption
[W ]		 System efficacy
[lm/W ]		 Net weight
[kg ]		 A
[mm ]		 D
[mm ]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: translucent polycarbonate
54100 BELTR LED 1.1ft 800/840 800 580 6 102 0.6 330 220
Type
BELTR LED 1.1ft 800/840 54100
Collapse
54090 BELTR LED 1.1ft 650/840 650 470 5 102 0.6 330 220
Type
BELTR LED 1.1ft 650/840 54090
Collapse
54110 BELTR LED 1.2ft 1300/840 1300 1040 10 104 0.8 610 500
Type DALI
BELTR LED 1.2ft 1300/840 54110 54113
Collapse
54120 BELTR LED 1.2ft 1600/840 1600 1250 12 104 0.8 610 500
Type DALI
BELTR LED 1.2ft 1600/840 54120 54123
Collapse
54180 BELTR LED 1.4ft 2600/840 2600 1910 18 106 1.5 1170 1000
Type M1h DALI DALI M1h
BELTR LED 1.4ft 2600/840 54180 54184 54183 54187
Collapse
54140 BELTR LED 1.4ft 3200/840 3200 2360 22 107 1.4 1170 1000
Type M1h DALI DALI M1h
BELTR LED 1.4ft 3200/840 54140 54144 54143 54147
Collapse
54190 BELTR LED 1.5ft 3250/840 3250 2310 22 105 1.9 1450 1000
Type M1h DALI DALI M1h
BELTR LED 1.5ft 3250/840 54190 54194 54193 54197
Collapse
54150 BELTR LED 1.5ft 4000/840 4000 2910 27 108 1.8 1450 1000
Type M1h DALI DALI M1h
BELTR LED 1.5ft 4000/840 54150 54154 54153 54157
Collapse
54160 BELTR LED 2.1ft 1300/840 1300 1040 10 104 1 330 250
Type SNS
BELTR LED 2.1ft 1300/840 54160 54168
Collapse
54200 BELTR LED 2.1ft 1600/840 1600 1250 12 104 1 330 250
Type SNS
BELTR LED 2.1ft 1600/840 54200 54208
Collapse
54210 BELTR LED 2.2ft 2600/840 2600 1890 18 105 1.4 610 500
Type DALI SNS
BELTR LED 2.2ft 2600/840 54210 54213 54218
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.2ft S3F 2600/840 54410 54413 54418
Collapse
54220 BELTR LED 2.2ft 3200/840 3200 2350 22 107 1.3 610 500
Type DALI SNS
BELTR LED 2.2ft 3200/840 54220 54223 54228
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.2ft S3F 3200/840 54420 54423 54428
Collapse
54280 BELTR LED 2.4ft 5200/840 5200 3770 35 108 2.4 1170 1000
Type M1h DALI DALI M1h SNS
BELTR LED 2.4ft 5200/840 54280 54284 54283 54287 54288
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.4ft S3F 5200/840 54480 54484 54483 x 54488
Collapse
54240 BELTR LED 2.4ft 6400/840 6400 4640 42 110 2.3 1170 1000
Type M1h DALI DALI M1h SNS
BELTR LED 2.4ft 6400/840 54240 54244 54243 54247 54248
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.4ft S3F 6400/840 54440 54444 54443 x 54448
Collapse
54290 BELTR LED 2.5ft 6500/840 6500 4750 44 108 3.1 1450 1000
Type M1h DALI DALI M1h SNS
BELTR LED 2.5ft 6500/840 54290 54294 54293 54297 54298
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.5ft S3F 6500/840 54490 54494 54493 x 54498
Collapse
54250 BELTR LED 2.5ft 8000/840 8000 5800 53 109 2.9 1450 1000
Type M1h DALI DALI M1h SNS
BELTR LED 2.5ft 8000/840 54250 54254 54253 54257 54258
through-wiring with the use of external terminal blocks Wieland (S) GST15i5
BELTR LED 2.5ft S3F 8000/840 54450 54454 54453 x 54458
Collapse
Show product line

YOU CANNOT MANAGE SOMETHING? WRITE US.

Checking question (protection against bots)