PRIMA T8 ta60

Plastic industrial fluorescent light fitting intended for extremely high ambient temperatures of up to 60°C, with diffuser made of transparent polycarbonate and for tubes T8.

The light fitting is suitable for the environment with high ambient temperatures (max. up to 60°C). The light fitting meets the requirements for bakeries, heating plants, metallurgical lines and transformer stations.

The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact.

(It is necessary to consider exhalation in the air reducing the usability of the plastic at installations in an aggressive environment We do not recommend to use the light fitting in the environment where greasy fumes are present (e.g. cooker hoods). The light fitting ALUMAX T8 Ta60 can be used for this environment. )

Suitability for use

Industry
Industry
Shopping centres
Shopping centres
Sports grounds
Sports grounds
Food industry
Food industry

Description

Advantages

  • Minimum ambient temperature: ta = -30 °C (PRIMA 118v and 218 type ta = -25 °C)
  • Certification: ESČ, HACCP
  • Maximum ambient temperature: ta = 60 °C (type PRIMA 258 ta = 55 °C)
  • Light fitting protection: IP66

Materials / finishes

  • Body: grey polycarbonate (PC), UV stable, impact-resistant
  • Sealing: polyurethane (PUR), foamed body groove
  • Terminal block: screwless, three-pole (basic version)
  • Reflector: steel sheet, white colour (RAL 9003)
  • Clips: stainless steel + polyamide
  • Cable glands: rubber (SBS)
  • Distance part: polyamide + 10 % glass fibre, it is used for reflector attachment during assembly
  • Diffuser: transparent polycarbonate (PC), UV stable, impact-resistant

Electric equipment

  • Tridonic Industry electronic ballast with higher thermal resistance

Attachment method

  • Suspension with the use of stainless hooks
  • Attachment with the use of side hangers to the wall
  • Directly to a ceiling or a wall with the use of screws and stainless brackets

Installation

Download

Accessories to PRIMA T8 ta60

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual
PRODUCT VARIANTS AND TECHNICAL DATA Clicking the 5-digit code displays other product information.
Code Type Power consumption
[W]
Luminous flux of light fitting
[lm]
System efficacy
[lm/W]
Net weight
[kg]
A
[mm]
D
[mm]
Diffuser made of transparent polycarbonate (PC) - electronic ballast - T8/G13 - stainless clips (c)
96515 PRIMA 118v PCc E ta60 1x18 1350 82 1.6 662 350
Type
PRIMA 118v PCc E ta60 96515
Collapse
96525 PRIMA 136v PCc E ta60 1x36 3350 82 2.3 1272 700
Type 1F 3F
PRIMA 136v PCc E ta60 96525 96521 96523
Collapse
96535 PRIMA 158v PCc E ta60 1x58 5200 82 3.2 1572 940
Type 1F 3F
PRIMA 158v PCc E ta60 96535 96531 96533
Collapse
96545 PRIMA 218 PCc E ta60 2x18 2700 73 2 662 350
Type
PRIMA 218 PCc E ta60 96545
Collapse
96555 PRIMA 236 PCc E ta60 2x36 6700 73 3.7 1272 700
Type 1F 3F
PRIMA 236 PCc E ta60 96555 96551 96553
Collapse
96565 PRIMA 258 PCc E ta60 2x58 10400 73 5.2 1572 940
Type 1F 3F
PRIMA 258 PCc E ta60 96565 96561 96563
Collapse

YOU CANNOT MANAGE SOMETHING? WRITE US.

Checking question (protection against bots)