TYLIUS LED B

LED

(Ingress Protection: IP44) Code for protection level against dust, solid items and water

Nominal maximum temperature of environment 40 °C.

Electric equipment: for three-wire connection into screwed terminal block 2,5 mm2.

Light fitting suitable for direct installation on commonly flammable surfaces. At present, the light fittings are without mark, according to the new ČSN EN 60598-1 standard.

Electric equipment: for emergency illumination with own independent source.

Conformity mark documenting conformity verification of product with all EU harmonising provisions.

Plastic LED light fitting with IP44 protection, intended for emergency and orientation illumination, to be situated on the wall, with diffuser made of internally coated acrylic glass.

The light fitting is suitable for emergency and orientation illumination of hallways, offices, warehouses and production shop floors.

Suitability for use

Industry

Description

Advantages

Charging: M1h and M3h variants max. 24 h, M1hAt and M3hAt variant max. 12 h
Light fitting protection: IP44
Recognizing distance: 30 m
Maximum ambient temperature: ta = 40 °C

Materials / finishes

Diffuser: opalized acrylic glass (PL), UV stable
Body: white polycarbonate

Electric equipment

Driver, emergency module 1h or 3 h; M1h and M3h variants including Ni-Cd HT battery (3,6V); M1hAt and M3hAt variants including LiFePO4 (6,4V)

Attachment method

Directly to a wall with the use of screws

Download

Data sheet

Accessories to TYLIUS LED B

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual

LUMINOSITY CURVE

The catalogue sheet of each light fitting or the electronic catalogue in our website offer the luminosity curves. The luminosity curve shows graphically how the light fitting radiates light into the space. In other words, in what direction it emits light. The light source is situated in the centre of the system - in the polar area in the graph. When the light fitting is rotationally symmetric around its vertical axis (circle, square), we construct only one intensity distribution curve in one vertical plane. Red in our case. When the light fitting is not symmetric, we add a blue curve to the graph. The blue curve shows how the light fitting shines after rotation by 90° as against the first position. When measuring the light fitting in the axis of the source, we measure the C90-C270 plane; when measuring the light fitting vertically to the axis, we measure the C0-C180 plane. See the picture below.

The luminosity in the given direction is measured by the goniophotometer.
TREVOS disposes of that device.
We are able to measure all light fittings by ourselves and to record the luminous output.
So we can be sure that the light fitting shines as it should.

LUMINOSITY CURVE EXAMPLE.

PRODUCT VARIANTS AND TECHNICAL DATA Clicking the 5-digit code displays other product information.

Code Type Autonomy
[hr.] Power in emergency mode
[W] Battery type Charging time
[hr.] Net weight
[kg]

Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting

41611 TYLIUS LED B 101 M1h 1 1 Ni-Cd HT 24 1.6

Type

TYLIUS LED B 101 M1h	41611

Collapse

41612 TYLIUS LED B 102 M1h 1 2 Ni-Cd HT 24 1.6

Type

TYLIUS LED B 102 M1h	41612

Collapse

41613 TYLIUS LED B 101 M3h 3 1 Ni-Cd HT 24 1.6

Type

TYLIUS LED B 101 M3h	41613

Collapse

41614 TYLIUS LED B 102 M3h 3 2 Ni-Cd HT 24 1.7

Type

TYLIUS LED B 102 M3h	41614

Collapse

Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting with autotest

41615 TYLIUS LED B 101 M1hAt 1 1 LiFePO4 12 1.6

Type

TYLIUS LED B 101 M1hAt	41615

Collapse

41616 TYLIUS LED B 102 M1hAt 1 2 LiFePO4 12 1.6

Type

TYLIUS LED B 102 M1hAt	41616

Collapse

41617 TYLIUS LED B 101 M3hAt 3 1 LiFePO4 12 1.6

Type

TYLIUS LED B 101 M3hAt	41617

Collapse

41618 TYLIUS LED B 102 M3hAt 3 2 LiFePO4 12 1.7

Type

TYLIUS LED B 102 M3hAt	41618

Collapse

Nenalezeno v ceníku

EAN	Net weight

TYLIUS LED B

Suitability for use

Description

Advantages

Materials / finishes

Electric equipment

Attachment method

Download

Accessories to TYLIUS LED B

Drawings and graphs of luminosity

Nothing you say?

LUMINOSITY CURVE

LUMINOSITY CURVE EXAMPLE.

YOU CANNOT MANAGE SOMETHING? WRITE US.