PLEXI LED

LED

(Ingress Protection: IP20) Code for protection level against dust, solid items and water.

Nominal maximum temperature of environment 40 °C.

Electric equipment: for three-wire connection into screwed terminal block 2,5 mm2.

Light fitting suitable for direct installation on commonly flammable surfaces. At present, the light fittings are without mark, according to the new ČSN EN 60598-1 standard.

Class 1 light fitting - basic insulation, plus terminal for guard wire.

Electric equipment: for emergency illumination with own independent source.

Conformity mark documenting conformity verification of product with all EU harmonising provisions.

Plastic LED light fitting intended for emergency and orientation lighting, for installation into plasterboard lower ceilings, with base made of steel silver sheet and with acrylic glass.

The light fitting is suitable for emergency illumination of hallways and offices. It is intended for installation into plasterboard lower ceilings.

Suitability for use

Industry

Description

Advantages

Light fitting protection: IP20
Maximum ambient temperature: ta = 40 °C
Recognizing distance: 30 m
Charging: M1h and M3h variants max. 24 h, M1hAt and M3hAt variant max. 12 h

Materials / finishes

Diffuser: transparent plexi glass, UV stable
Body: steel sheet, silver (RAL 9006)

Electric equipment

Driver, emergency module 1h or 3 h; M1h and M3h variants including Ni-Cd HT battery (3,6V); M1hAt and M3hAt variants including LiFePO4 (6,4V)

Attachment method

Recessed into plasterboard lower ceilings

Download

Data sheet

Chemical resistance

Accessories to PLEXI LED

Drawings and graphs of luminosity

Nothing you say?

Check out instructions in which we explain what can be read from these graphs.

Manual

LUMINOSITY CURVE

The catalogue sheet of each light fitting or the electronic catalogue in our website offer the luminosity curves. The luminosity curve shows graphically how the light fitting radiates light into the space. In other words, in what direction it emits light. The light source is situated in the centre of the system - in the polar area in the graph. When the light fitting is rotationally symmetric around its vertical axis (circle, square), we construct only one intensity distribution curve in one vertical plane. Red in our case. When the light fitting is not symmetric, we add a blue curve to the graph. The blue curve shows how the light fitting shines after rotation by 90° as against the first position. When measuring the light fitting in the axis of the source, we measure the C90-C270 plane; when measuring the light fitting vertically to the axis, we measure the C0-C180 plane. See the picture below.

The luminosity in the given direction is measured by the goniophotometer.
TREVOS disposes of that device.
We are able to measure all light fittings by ourselves and to record the luminous output.
So we can be sure that the light fitting shines as it should.

LUMINOSITY CURVE EXAMPLE.

PRODUCT VARIANTS AND TECHNICAL DATA Clicking the 5-digit code displays other product information.

Code Type Autonomy
[hr.] Power in emergency mode
[W] Battery type Charging time
[hr.] Net weight
[kg]

Diffuser made of transparent acrylic glass - emergency standby source for emergency (SE) lighting

41519 PLEXI LED 101 NM1h 1 1 Ni-Cd HT 24 2.1

Type

PLEXI LED 101 NM1h	41519

PLEXI LED 101 NM3h	41539

Collapse

41539 PLEXI LED 101 NM3h 3 1 Ni-Cd HT 24 2.3

Type

PLEXI LED 101 NM3h	41539

Collapse

Diffuser made of transparent acrylic glass - emergency standby source for both permanent (SA) and emergency (SE) lighting

41518 PLEXI LED 101 M1h 1 1 Ni-Cd HT 24 2.1

Type

PLEXI LED 101 M1h	41518

PLEXI LED 101 M3h	41538

Collapse

41538 PLEXI LED 101 M3h 3 1 Ni-Cd HT 24 2.3

Type

PLEXI LED 101 M3h	41538

Collapse

Diffuser made of transparent acrylic glass - emergency standby source for both permanent (SA) and emergency (SE) lighting with autotest

41548 PLEXI LED 101 M1hAt 1 1 LiFePO4 12 2.1

Type

PLEXI LED 101 M1hAt	41548

PLEXI LED 101 M3hAt	41568

Collapse

41568 PLEXI LED 101 M3hAt 3 1 LiFePO4 12 2.3

Type

PLEXI LED 101 M3hAt	41568

Collapse

Diffuser made of transparent plexi glass - driver for central battery power supply AC/DC (CB = central battery)

41578 PLEXI LED 101 CB 0 1 0 0 1.7

Type

PLEXI LED 101 CB	41578

Collapse

Nenalezeno v ceníku

EAN	Net weight

PLEXI LED

Suitability for use

Description

Advantages

Materials / finishes

Electric equipment

Attachment method

Download

Accessories to PLEXI LED

Drawings and graphs of luminosity

Nothing you say?

LUMINOSITY CURVE

LUMINOSITY CURVE EXAMPLE.

YOU CANNOT MANAGE SOMETHING? WRITE US.